Point in Polygon & Intersect
Contents
Point in Polygon & Intersect#
Finding out if a certain point is located inside or outside of an area, or finding out if a line intersects with another line or polygon are fundamental geospatial operations that are often used e.g. to select data based on location. Such spatial queries are one of the typical first steps of the workflow when doing spatial analysis. Performing a spatial join (will be introduced later) between two spatial datasets is one of the most typical applications where Point in Polygon (PIP) query is used.
For further reading about PIP and other geometric operations, see Chapter 4.2 in Smith, Goodchild & Longley: Geospatial Analysis - 6th edition.
How to check if point is inside a polygon?#
Computationally, detecting if a point is inside a polygon is most commonly done using a specific formula called Ray Casting algorithm. Luckily, we do not need to create such a function ourselves for conducting the Point in Polygon (PIP) query. Instead, we can take advantage of Shapely’s binary predicates that can evaluate the topolocical relationships between geographical objects, such as the PIP as we’re interested here.
There are basically two ways of conducting PIP in Shapely:
using a function called within() that checks if a point is within a polygon
using a function called contains() that checks if a polygon contains a point
Notice: even though we are talking here about Point in Polygon operation, it is also possible to check if a LineString or Polygon is inside another Polygon.
Let’s import shapely functionalities and create some points:
from shapely.geometry import Point, Polygon
# Create Point objects
p1 = Point(24.952242, 60.1696017)
p2 = Point(24.976567, 60.1612500)
Let’s also create a polygon using a list of coordinate-tuples:
# Create a Polygon
coords = [(24.950899, 60.169158), (24.953492, 60.169158), (24.953510, 60.170104), (24.950958, 60.169990)]
poly = Polygon(coords)
# Let's check what we have
print(p1)
print(p2)
print(poly)
POINT (24.952242 60.1696017)
POINT (24.976567 60.16125)
POLYGON ((24.950899 60.169158, 24.953492 60.169158, 24.95351 60.170104, 24.950958 60.16999, 24.950899 60.169158))
Let’s check if those points are
within
the polygon:
# Check if p1 is within the polygon using the within function
p1.within(poly)
True
# Check if p2 is within the polygon
p2.within(poly)
False
Okey, so we can see that the first point seems to be inside that polygon and the other one isn’t.
-In fact, the first point is quite close to close to the center of the polygon as we can see if we compare the point location to the polygon centroid:
# Our point
print(p1)
# The centroid
print(poly.centroid)
POINT (24.952242 60.1696017)
POINT (24.95224242849236 60.16960179038188)
It is also possible to do PIP other way around, i.e. to check if polygon contains a point:
# Does polygon contain p1?
poly.contains(p1)
True
# Does polygon contain p2?
poly.contains(p2)
False
Thus, both ways of checking the spatial relationship are identical; contains() is inverse to within() and vice versa.
Which one should you use then? Well, it depends:
if you have many points and just one polygon and you try to find out which one of them is inside the polygon: You might need to iterate over the points and check one at a time if it is within() the polygon.
if you have many polygons and just one point and you want to find out which polygon contains the point: You might need to iterate over the polygons until you find a polygon that contains() the point specified (assuming there are no overlapping polygons)
Intersect#
Another typical geospatial operation is to see if a geometry intersects or touches another one. Again, there are binary operations in Shapely for checking these spatial relationships:
intersects(): Two objects intersect if the boundary or interior of one object intersect in any way with the boundary or interior of the other object.
touches(): Two objects touch if the objects have at least one point in common and their interiors do not intersect with any part of the other object.
Let’s try these out.
Let’s create two LineStrings:
from shapely.geometry import LineString, MultiLineString
# Create two lines
line_a = LineString([(0, 0), (1, 1)])
line_b = LineString([(1, 1), (0, 2)])
Let’s see if they intersect
line_a.intersects(line_b)
True
Do they also touch?
line_a.touches(line_b)
True
Indeed, they do and we can see this by plotting the features together
# Create a MultiLineString from line_a and line_b
multi_line = MultiLineString([line_a, line_b])
multi_line
Thus, the line_b
continues from the same node ( (1,1) ) where line_a
ends.
However, if the lines overlap fully, they don’t touch due to the spatial relationship rule, as we can see:
Check if line_a
touches itself:
# Does the line touch with itself?
line_a.touches(line_a)
False
It does not. However, it does intersect:
# Does the line intersect with itself?
line_a.intersects(line_a)
True
Point in Polygon using Geopandas#
Next we will do a practical example where we check which of the addresses from the geocoding tutorial are located in Southern district of Helsinki. Let’s start by reading a KML-file PKS_suuralue.kml
that has the Polygons for districts of Helsinki Region (data openly available from Helsinki Region Infoshare.
Let’s start by reading the addresses from the Shapefile that we saved earlier.
import geopandas as gpd
fp = "data/addresses.shp"
data = gpd.read_file(fp)
data.head()
/home/aagesenh/.conda/envs/python-gis/lib/python3.8/site-packages/geopandas/_compat.py:111: UserWarning: The Shapely GEOS version (3.9.1dev-CAPI-1.14.1) is incompatible with the GEOS version PyGEOS was compiled with (3.9.1-CAPI-1.14.2). Conversions between both will be slow.
warnings.warn(
address | id | addr | geometry | |
---|---|---|---|---|
0 | Ruoholahti, 14, Itämerenkatu, Ruoholahti, Läns... | 1000 | Itämerenkatu 14, 00101 Helsinki, Finland | POINT (24.91556 60.16320) |
1 | Kamppi, 1, Kampinkuja, Kamppi, Eteläinen suurp... | 1001 | Kampinkuja 1, 00100 Helsinki, Finland | POINT (24.93169 60.16902) |
2 | Kauppakeskus Citycenter, 8, Kaivokatu, Keskust... | 1002 | Kaivokatu 8, 00101 Helsinki, Finland | POINT (24.94179 60.16989) |
3 | Hermannin rantatie, Verkkosaari, Kalasatama, S... | 1003 | Hermannin rantatie 1, 00580 Helsinki, Finland | POINT (24.97783 60.18892) |
4 | Hesburger, 9, Tyynenmerenkatu, Jätkäsaari, Län... | 1005 | Tyynenmerenkatu 9, 00220 Helsinki, Finland | POINT (24.92160 60.15665) |
Reading KML-files in Geopandas#
It is possible to read the data from KML-files with GeoPandas in a similar manner as Shapefiles. However, we need to first, enable the KML-driver which is not enabled by default (because KML-files can contain unsupported data structures, nested folders etc., hence be careful when reading KML-files). Supported drivers are managed with fiona.supported_drivers
, which is integrated in geopandas. Let’s first check which formats are currently supported:
import geopandas as gpd
gpd.io.file.fiona.drvsupport.supported_drivers
{'ARCGEN': 'r',
'DXF': 'rw',
'CSV': 'raw',
'OpenFileGDB': 'r',
'ESRIJSON': 'r',
'ESRI Shapefile': 'raw',
'FlatGeobuf': 'rw',
'GeoJSON': 'raw',
'GeoJSONSeq': 'rw',
'GPKG': 'raw',
'GML': 'rw',
'OGR_GMT': 'rw',
'GPX': 'rw',
'GPSTrackMaker': 'rw',
'Idrisi': 'r',
'MapInfo File': 'raw',
'DGN': 'raw',
'PCIDSK': 'rw',
'OGR_PDS': 'r',
'S57': 'r',
'SQLite': 'raw',
'TopoJSON': 'r'}
Let’s enable the read and write functionalities for KML-driver by passing
'rw'
to whitelist of fiona’s supported drivers:
gpd.io.file.fiona.drvsupport.supported_drivers['KML'] = 'rw'
Let’s check again the supported drivers:
gpd.io.file.fiona.drvsupport.supported_drivers
{'ARCGEN': 'r',
'DXF': 'rw',
'CSV': 'raw',
'OpenFileGDB': 'r',
'ESRIJSON': 'r',
'ESRI Shapefile': 'raw',
'FlatGeobuf': 'rw',
'GeoJSON': 'raw',
'GeoJSONSeq': 'rw',
'GPKG': 'raw',
'GML': 'rw',
'OGR_GMT': 'rw',
'GPX': 'rw',
'GPSTrackMaker': 'rw',
'Idrisi': 'r',
'MapInfo File': 'raw',
'DGN': 'raw',
'PCIDSK': 'rw',
'OGR_PDS': 'r',
'S57': 'r',
'SQLite': 'raw',
'TopoJSON': 'r',
'KML': 'rw'}
Now we should be able to read a KML file using the geopandas read_file() function.
Let’s read district polygons from a KML -file that is located in the data-folder:
# Filepath to KML file
fp = "data/PKS_suuralue.kml"
polys = gpd.read_file(fp, driver='KML')
#Check the data
print(f"Number of rows: {len(polys)}")
polys.head(11)
Number of rows: 23
Name | Description | geometry | |
---|---|---|---|
0 | Suur-Espoonlahti | POLYGON Z ((24.77506 60.10906 0.00000, 24.7766... | |
1 | Suur-Kauklahti | POLYGON Z ((24.61578 60.17257 0.00000, 24.6155... | |
2 | Vanha-Espoo | POLYGON Z ((24.67576 60.21201 0.00000, 24.6752... | |
3 | Pohjois-Espoo | POLYGON Z ((24.76792 60.26920 0.00000, 24.7699... | |
4 | Suur-Matinkylä | POLYGON Z ((24.75361 60.16631 0.00000, 24.7537... | |
5 | Kauniainen | POLYGON Z ((24.69075 60.21958 0.00000, 24.6924... | |
6 | Suur-Leppävaara | POLYGON Z ((24.79747 60.20827 0.00000, 24.7954... | |
7 | Suur-Tapiola | POLYGON Z ((24.84436 60.16598 0.00000, 24.8443... | |
8 | Myyrmäki | POLYGON Z ((24.82459 60.29025 0.00000, 24.8243... | |
9 | Kivistö | POLYGON Z ((24.94309 60.33845 0.00000, 24.9421... | |
10 | Eteläinen | POLYGON Z ((24.78277 60.09997 0.00000, 24.8197... |
Nice, now we can see that we have 23 districts in our area. Let’s quickly plot the geometries to see how the layer looks like:
polys.plot()
<AxesSubplot:>
We are interested in an area that is called Eteläinen
(‘Southern’ in English).
Let’s select the Eteläinen
district and see where it is located on a map:
# Select data
southern = polys.loc[polys['Name']=='Eteläinen']
# Reset index for the selection
southern.reset_index(drop=True, inplace=True)
# Check the selction
southern.head()
Name | Description | geometry | |
---|---|---|---|
0 | Eteläinen | POLYGON Z ((24.78277 60.09997 0.00000, 24.8197... |
Let’s create a map which shows the location of the selected district, and let’s also plot the geocoded address points on top of the map:
import matplotlib.pyplot as plt
# Create a figure with one subplot
fig, ax = plt.subplots()
# Plot polygons
polys.plot(ax=ax, facecolor='gray')
southern.plot(ax=ax, facecolor='red')
# Plot points
data.plot(ax=ax, color='blue', markersize=5)
plt.tight_layout()
Okey, so we can see that, indeed, certain points are within the selected red Polygon.
Let’s find out which one of them are located within the Polygon. Hence, we are conducting a Point in Polygon query.
First, let’s check that we have shapely.speedups
enabled. This module makes some of the spatial queries running faster (starting from Shapely version 1.6.0 Shapely speedups are enabled by default):
#import shapely.speedups
from shapely import speedups
speedups.enabled
# If false, run this line:
#shapely.speedups.enable()
True
Let’s check which Points are within the
southern
Polygon. Notice, that here we check if the Points arewithin
the geometry of thesouthern
GeoDataFrame.We use the
.at[0, 'geometry']
to parse the actual Polygon geometry object from the GeoDataFrame.
pip_mask = data.within(southern.at[0, 'geometry'])
print(pip_mask)
0 True
1 True
2 True
3 False
4 True
5 False
6 False
7 False
8 False
9 False
10 True
11 False
12 False
13 False
14 False
15 False
16 False
17 False
18 False
19 False
20 False
21 False
22 False
23 False
24 False
25 False
26 False
27 False
28 False
29 False
30 True
31 True
32 True
33 True
dtype: bool
As we can see, we now have an array of boolean values for each row, where the result is True
if Point was inside the Polygon, and False
if it was not.
We can now use this mask array to select the Points that are inside the Polygon. Selecting data with this kind of mask array (of boolean values) is easy by passing the array inside the loc
indexer:
pip_data = data.loc[pip_mask]
pip_data
address | id | addr | geometry | |
---|---|---|---|---|
0 | Ruoholahti, 14, Itämerenkatu, Ruoholahti, Läns... | 1000 | Itämerenkatu 14, 00101 Helsinki, Finland | POINT (24.91556 60.16320) |
1 | Kamppi, 1, Kampinkuja, Kamppi, Eteläinen suurp... | 1001 | Kampinkuja 1, 00100 Helsinki, Finland | POINT (24.93169 60.16902) |
2 | Kauppakeskus Citycenter, 8, Kaivokatu, Keskust... | 1002 | Kaivokatu 8, 00101 Helsinki, Finland | POINT (24.94179 60.16989) |
4 | Hesburger, 9, Tyynenmerenkatu, Jätkäsaari, Län... | 1005 | Tyynenmerenkatu 9, 00220 Helsinki, Finland | POINT (24.92160 60.15665) |
10 | Rautatientori, Kaisaniemi, Kluuvi, Eteläinen s... | 1011 | Rautatientori 1, 00100 Helsinki, Finland | POINT (24.94410 60.17133) |
30 | Kampin keskus, 1, Urho Kekkosen katu, Kamppi, ... | 1031 | Urho Kekkosen katu 1, 00100 Helsinki, Finland | POINT (24.93312 60.16909) |
31 | Ruoholahdenkatu, Hietalahti, Kamppi, Eteläinen... | 1032 | Ruoholahdenkatu 17, 00101 Helsinki, Finland | POINT (24.92496 60.16497) |
32 | Easy Cycles, 3, Tyynenmerenkatu, Jätkäsaari, L... | 1033 | Tyynenmerenkatu 3, 00220 Helsinki, Finland | POINT (24.92119 60.15890) |
33 | Oluthuone Kaisla, 4, Vilhonkatu, Kaisaniemi, K... | 1034 | Vilhonkatu 4, 00101 Helsinki, Finland | POINT (24.94709 60.17191) |
Let’s finally confirm that our Point in Polygon query worked as it should by plotting the points that are within the southern district:
# Create a figure with one subplot
fig, ax = plt.subplots()
# Plot polygons
polys.plot(ax=ax, facecolor='gray')
southern.plot(ax=ax, facecolor='red')
# Plot points
pip_data.plot(ax=ax, color='gold', markersize=2)
plt.tight_layout()
Perfect! Now we only have the (golden) points that, indeed, are inside the red Polygon which is exactly what we wanted!